Azden WMS-PRO Wireless Microphone System Review
Azden WMS-PRO Wireless Microphone System Feature
- LEDs on transmitter and receiver confirm system status
- Ear-phone included to monitor sound being recorded and receiver plugs into camera?s external microphone jack
- Both units use 1 AA battery
- System includes: WR-PRO receiver, WM-PRO belt-pack transmitter, lavaliere electret condenser microphone and hand-held electret condenser microphone
The transmitter and receiver operate in the VHF band, where interference is very low. Choose between 169.445 MHz and 170.245 MHz for the clearest transmission and reception. The transmitter and receiver each operates for about 10 continuous hours on a single 9V battery (not included).
The receiver comes with an attached shoe mount for mounting a video camera, which may be easily removed using a Philips-head screwdriver. You can also attach the receiver with the supplied Velcro strip. The receiver includes an output jack and a telescopic antenna. Plug the supplied earphone into the jack to monitor your recording, or plug the earphone into a camera's earphone jack.
The system conforms to Part 90 of FCC rules, and it's not to be used in high temperatures, high humidity, or near a broadcasting station, airport, or on an airplane.
What's in the Box
WM-PRO transmitter, WR-PRO receiver, EX-503 lapel microphone, EX-413 handheld microphone, a camera shoe mount, a monaural earphone, a Velcro strip, and a user's manual/spec sheet.
The "all-time" best selling wireless microphone for videography. This versatile system consists of the WM-PRO belt-pack transmitter 2 plug-in electret condenser microphones, a lavalier (EX-503) and handheld (EX-413) and the WR-PRO receiver which comes with both shoe-mount and hook and loop fastener. All receivers and transmitters in the "PRO" Series are on the same 2 frequencies (169.445MHz and 170.245MHz).
No comments:
Post a Comment